K-Sheet
| Product Description |
Kreca K-Sheet is a C/C composite sheet made of Kureha Carbon Fiber. It is used for heat insulation protection, plates in heat treatment and sintering furnaces, muffles, and other heat-resistant materials. These applications best exploit the following properties: (1) Excellent Flexibility and easy processing, (2) High resistance to thermal impact, (3) Thinness and lightness, (4) Air-tightness and electrical conductivity, (5) Resistance to heat, corrosion and wear, and (6) usable in high-vacuum or inert atmosphere furnaces operated at up to 3000℃. The maximum size is 730mm x 730mm, with thickness selectable from 0.6mm, 1.2mm, 2.4mm, and 3.2mm.
|
| Product Specifications |
| |
Typical Data |
| Sheet Type |
Frame Type |
| Bulk Dencity(g/mL) |
0.8 |
1.1 |
| Thickness(mm) |
1.1 |
1.3 |
| Carbon Contents (wt %) |
> 99 |
| Ash Contents (ppm) |
360 |
| Oxidation Resistance *(℃) |
680 |
| Flexural Strength (MPa) |
40 |
50 |
| Flexural Modulus **(GPa) |
20 |
25 |
* Calculated by thermo-gravimetric analysis data.
** Calculated between from 1MPa to 5MPa of bending strength s-s curb.
|
|
|
Carbon Products
